Air Curve 10 Troubleshooting

🛠️ AirCurve 10 Whining Noise – Quick Troubleshooting Guide

🎯 Symptom: High-pitched or whining noise during inhalation/exhalation


âś… Step-by-Step Checklist

âś… Task Description
1. Check Mask Fit Reseat your mask. Run “Mask Fit” under “My Options” on the device. Replace cushion if worn.
2. Inspect Tubing Look for cracks or pinholes. Ensure tight connections at both mask and machine ends. Replace if needed.
3. Check Humidifier Chamber Remove, clean, dry, and firmly reseat the water tub. Replace if cracked or warped.
4. Replace Air Filter Dirty or loose filters can cause airflow noise. Replace with a ResMed-branded filter. Located behind side panel.
5. Reset the Device Unplug machine for 15 seconds. Plug back in and listen if sound changes.
6. Evaluate Pressure Settings If pressure recently increased, airflow noise may be louder. Consult provider if unsure.
My Shopping Cart

Your Order Ships FREE!

Your shipping is $11.00
Add $99.00

for Free Shipping

$0.00 Total: $0.00 You are saving: $0.00
Continue Shopping Checkout →